AddressLot 36, Jalan BRP 9/2B, Putra Industrial Park, Bukit Rahman Putra, 47000 Sungai Buloh Selangor Darul Ehsan, Malaysia.
Call us+603-6140 5928
Write ussales@engtexutara.com.my

 

EMU Welded Wire Steel GrilleProducts

Engtex Metals (Utara)EMU Welded Wire Steel Grille

  • Products Description
  • Product Specification
  • Installations
GRILLE
Welded Steel Grille 1
Welded Steel Grille 2
Welded Steel Grille 3
Welded Steel Grille 4
Welded Steel Grille 5

EMU WELDED WIRE STEEL GRILLE are manufactured using latest European state of art mesh welding technology that deliver high quality products that meets local and international standards (BS EN 10233-7:2012 and ASTM).

EMU Welded Wire Steel Grille system are stand alone and comes in complete package of pre-welded panels, stainless steel U clips, stainless steel bolt and nuts, stainless steel cap and pre-zinc galvanised posts.

EMU WELDED WIRE STEEL GRILLE is manufactured to BS EN 10223-7:2012

Zinc Coated after fabrication comply to BS EN ISO 1461

Use of EMU Welded Wire Steel Grille

  • Highway area
  • Railway Track & Station (KTM / MRT / LRT)
  • Housing area (Gated & Guarded Safety Grille)
  • Industrial area (Warehousing / Factory Safety grille & Machine Safety grille)
  • Walkway area (Anti Snatch / Safety barrier purpose)
  • Construction (Temporary Grille system for safety purpose)

Advantages of EMU Welded Wire Steel Grille

  • More Rigidly and Robust compared to woven chain link fencing.
  • Longer service life span- Hot Dip Galvanised
  • Low maintenance required
  • Landscaping
  • Environmentally friendly – (Recyclable)
Specification

Sirim Standard Reference (BS EN 10223-7:2012)

CLAUSE REQUIREMENT
TENSILE STRENGTH
Tensile Strength Horizontal Wire, Rm (MPa) 350 – 950
Tensile Strength Vertical Wire, Rm (MPa) 350 – 950
SIZE TOLERENCES (CROSS REFER BS EN 10218-2:2012)
Diameter (mm) 5.0 +/- 0.05
Out of Roundness (mm) 0.075 max
MESH DIMENSION & TOLERENCES
Horizontal Dimension (mm) +/- 2.0
Vertical Dimension (mm) +/- 2.0
COATINGS
Coating Mass (g./m2)
(Cross refer EN ISO 1461)		 395 Min
WELD SHEAR STRENGTH
Average of four loads > 50% of wire breaking load (kN)
50 % of Wire breaking load 4.26kN
STIFFNESS
Heavy Panel (kPa.m4) 1.0 min
EMU WELDED WIRE STEEL GRILLE – STANDARD SHEET

EMU Standard Sheet Wire Mesh is manufactured in sheet form Standard Mesh which 2.4 metres length by varios height (0.9m – 2.4m)
Mesh Type : A, B, C, E & F (Refer standard mesh table)

EMU WELDED WIRE STEEL GRILLE – CUSTOM SIZE SHEET

EMU Custom Size Mesh can be produced with a combination of different wire diameter, spacing and dimensions which varios length and varios height. It also come with design shop drawings.

A Series

https://engtexutara.com.my/wp-content/uploads/2021/04/Aseries.jpg
https://engtexutara.com.my/wp-content/uploads/2021/08/EMU-A-SERIES.jpg
https://engtexutara.com.my/wp-content/uploads/2021/08/EMU-A-SERIES-2.jpg
PANEL SIZE SPACING
A SERIES HEIGHT(mm) WIDTH VERTICAL HORIZONTAL
WIRE DIAMETER
EMU 3A 900 2400mm 50mm 150mm 5mm
EMU 4A 1200 2400mm 50mm 150mm 5mm
EMU 5A 1500 2400mm 50mm 150mm 5mm
EMU 6A 1800 2400mm 50mm 150mm 5mm
EMU 7A 2100 2400mm 50mm 150mm 5mm
EMU 8A 2400 2400mm 50mm 150mm 5mm

B Series

https://engtexutara.com.my/wp-content/uploads/2021/04/Bseries.jpg
https://engtexutara.com.my/wp-content/uploads/2021/08/EMU-B-SERIES.jpg
PANEL SIZE SPACING
B SERIES HEIGHT(mm) WIDTH VERTICAL HORIZONTAL
WIRE DIAMETER
EMU 3B 900 2400mm 75mm 200mm/300mm 5mm
EMU 4B 1200 2400mm 75mm 200mm/300mm 5mm
EMU 5B 1500 2400mm 75mm 200mm/300mm 5mm
EMU 6B 1800 2400mm 75mm 200mm/300mm 5mm
EMU 7B 2100 2400mm 75mm 200mm/300mm 5mm
EMU 8B 2400 2400mm 75mm 200mm/300mm 5mm

C Series

https://engtexutara.com.my/wp-content/uploads/2021/04/Cseries.jpg
https://engtexutara.com.my/wp-content/uploads/2021/08/EMU-C-SERIES.jpg
PANEL SIZE SPACING
C SERIES HEIGHT(mm) WIDTH VERTICAL HORIZONTAL WIRE DIAMETER
EMU 3C 900 2400mm 50mm 150mm/ 200mm 5mm
EMU 4C 1200 2400mm 50mm 150mm/ 200mm 5mm
EMU 5C 1500 2400mm 50mm 150mm/ 200mm 5mm
EMU 6C 1800 2400mm 50mm 150mm/ 200mm 5mm
EMU 7C 2100 2400mm 50mm 150mm/ 200mm 5mm
EMU 8C 2400 2400mm 50mm 150mm/ 200mm 5mm

E series

https://engtexutara.com.my/wp-content/uploads/2021/04/Eseries.jpg
https://engtexutara.com.my/wp-content/uploads/2021/08/EMU-E-SERIES.jpg
https://engtexutara.com.my/wp-content/uploads/2021/08/EMU-E-SERIES-2.jpg
PANEL SIZE SPACING
E SERIES HEGHT(mm) WIDTH VERTICAL HORIZONTAL
WIRE DIAMETER
EMU 3E 900 2400mm 75mm 12.5mm 4mm
EMU 4E 1200 2400mm 75mm 12.5mm 4mm
EMU 5E 1500 2400mm 75mm 12.5mm 4mm
EMU 6E 1800 2400mm 75mm 12.5mm 4mm
EMU 7E 2100 2400mm 75mm 12.5mm 4mm
EMU 8E 2400 2400mm 75mm 12.5mm 4mm

F Series

https://engtexutara.com.my/wp-content/uploads/2021/04/Fseries.jpg
https://engtexutara.com.my/wp-content/uploads/2021/08/EMU-F-SERIES.jpg
https://engtexutara.com.my/wp-content/uploads/2021/08/EMU-F-SERIES-2.jpg
PANEL SIZE SPACING
F SERIES HEGHT(mm) WIDTH VERTICAL HORIZONTAL
WIRE DIAMETER
EMU 3F 900 2400mm 25mm 75mm 4mm
EMU 4F 1200 2400mm 25mm 75mm 4mm
EMU 5F 1500 2400mm 25mm 75mm 4mm
EMU 6F 1800 2400mm 25mm 75mm 4mm
EMU 7F 2100 2400mm 25mm 75mm 4mm
EMU 8F 2400 2400mm 25mm 75mm 4mm
https://engtexutara.com.my/wp-content/uploads/2021/04/Installations-final.jpg
https://engtexutara.com.my/wp-content/uploads/2021/03/engtex-footerlogo.png

Engtex Metal (Utara) Sdn Bhd
REG.NO 200201032441 (600106-U)
specializing in manufacturing high quality BRC welded wire mesh, hard drawn wire and welded wire steel grille/fence to meet our customers’ requirements.

Useful Link

Products

Standard Size Mesh | Cut to Size Mesh | Special Size Mesh

Security Grille / Fence | Anti-climb Grille / Fence | Anti Snatch Grille / Fence | Roll Top Grille / Fence| V Press Grille / Fence | Temporary Grille / Fence

Hard Drawn Round Wire | Hard Drawn Ribbed wire |

Round Bar | Round & Deform Bar

Contact us

Lot 36, Jalan BRP 9/2B, Putra Industrial Park, Bukit Rahman Putra, 47000 Sungai Buloh Selangor Darul Ehsan, Malaysia.
+603- 6140 5928
+03- 6140 4545
sales@engtexutara.com.my

Welded Wire Steel Grille Division

LEONG:+6012-372 2028

Welded Ribbed Wire Mesh Division

ALLAN: +6012-377 8570